Slim Qube SSQUHT
High Temperature Centrifugal Box Fan
- Box sizes of 500, 670, 820 and 1020mm
- Suitable for operating temperatures of up to +120°C (in duct)
- Painted Aluminium Corners
- Interchangeable double skinned panels
- Available in AC
Got a question about this product?
Compatible Accessories
Overview
A multi-discharge, double skinned fan unit incorporating a high performance backward curved impeller. With the motor situated out of the airstream, it is suitable for more arduous and elevated temperature applications.
- Product Overview
- Installation and Maintenance
Downloads
Features and Benefits
High Temperature
Motors are out of the air stream and are not affected by contaminants in the ventilated air. The range is suitable for various applications, from contaminated air to elevated temperatures up to 120°C.
Intelligent Design
Designed to maximise performance and reduce the use of energy having moveable panels allowing the outlet position to be altered on site to suit installation.
Low Noise
Unit is constructed from double insulated panels filled with 25mm fibreglass acoustic insulation reducing radiated noise.
Robust Construction
Corrosion resistant aluminium frame with painted aluminium corners for strength and durability.
High Temperature
Motor is out of the airstream allowing temperatures up to 120°C.
Controllability
Suitable for speed control and integration into a building management system dependant on model.
Warranty
Each SSQU has a 24 month warranty.
Specification
Casing
Constructed from self-supporting corrosion-resistant extruded Aluminium section, assembled with aluminium corners and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non-flammable mineral wool, 60kg/m3, thereby minimising breakout noise.
Motors
Three phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls.
Impellers
Impeller shall be a high efficiency backward curved EN-AW 5754 aluminium with a non-overloading power characteristic, dynamically balanced to G6.3 according to ISO1940 part 1.
Control
Units shall be suitable for use with Variable frequency drive.
Design
The unit shall be designed and manufactured with procedures as defined in BS EN ISO 9001. Airside performance shall be tested to ISO 5801 and BS ISO 13347-1 for sound performance.
